+61883110575
Shop by Category
Shop by Brand
Gabriel Shock Absorbers
Gabriel PART FINDER
PRODUCT RANGE
UltraTM
ULTRA products are engineered for the ultimate in safety and performance.
ULTRA SHOCK ABSORBERS FOR PASSENGER CARS (69000/70000 SERIES)
- 30mm piston with custom valving to maximise ride confort and handling performance.
- Nitrogen gas charged for a responsive ride.
- Bulged profile for more fluid to reduce fade.
ULTRA STRUTS (G35/G52/G55/G56000 SERIES)
- Designed to meet or exceed original equipment specifications.
- Custom tuned valving and gas charging to help overcome harsh road conditions.
- StableSteer valving senses and instantly adjusts to changing road conditions.
ULTRA SPRING SEAT SHOCK ABSORBER (G51000 SERIES)
- Also known as a "Coil Over" shock, this unit is becoming popular in more Passanger Car and 4WD vehicles.
- Nitrogen charged, most part nos. have larger pistons than O.E. and are engineered for quality performance.
ULTRA CARTRIDGES (G44000 SERIES)
- Designed to meet or exceed original equipment specifications.
- Cartridge slips into dismantlable strut housing units.
- Custom tuned valving and gas charging to help overcome harsh road conditions.
ULTRA SHOCK ABSORBERS FOR LIGHT TRUCKS & 4WDS (G63000/G64000 SERIES)
- Bulged cylinder and 35mm piston designed for tougher working conditions.
- G-Force features maximise performance in handling and control.
- Wide vehicle application.
Ultraplus
Designed for top performance in 4x4 vehicles off road and on road.
ULTRAPLUS 4X4 SPRING SEAT SHOCK ABSORBERS (G43000)
ULTRAPLUS 4X4 SHOCK ABSORBER (G41000)
- Large 40mm bore pistons to cope with hard Off Road driving
- Nitrogen gas charged for superior response and consistent control
- Four lip piston seal reduces oil by-pass for maximum shock control and performance
- Large reservoir cylinder provides better cooling for longer shock life
- High temperature hydraulic oil reduces friction and wear in extreme operating conditions
- Top dirt wiper oil seal stops dirt from entering inside the shock
- 350 degree arc welding of mounts to resist side loading - far superior to a split eyering with side welding
- Specially formulated rubber and bonded bushes to withstand wear and tear on rough terrain
- The range includes shocks designed for fitment to vehicles with the original O.E. suspension height as well as for lift up to 50mm
ULTRAPLUS 4X4 STEERING DAMPER (35000 SERIES)
- 35mm piston bore, larger than the equivalent O.E., with larger oil volume capacity for longer life
- 15mm piston rod, also larger and stronger than O.E.
- Rugged mounts, interchangeable with the original
- Steel shield to protect the rod from stone damage
- 50/50 damping control for all steering lateral movement
GuardianTM
SHOCK ABSORBERS (81000 SERIES)
- Aftermarket engineered for OE-like performance
- High-quality comfort and performance at an economical price
- Nitrogen gas charged for superior response and consistent control
Steering Dampers
(14000 SERIES)
- Built to improve handling and control by providing added dampening of the steering system's lateral motion
- Reduces shimmy and wear on tyres and other front end parts
- Wide 4x4 vehicle applications
Strut Cushions Kits
- The Bump Stop prevents strut internal damage that may be caused by metal-to-metal contact on severe impact under severe compression of the piston rod.
- The Boot protects the strut’s chrome piston rod from damage and corrosion by keeping dirt and moisture away from it.
Strut Mounts Kits
- Also known as “Bearing Plates”, Strut Mounts together with Strut Cushions ensure long lasting performance of the Strut Units.
- When worn, they cause suspension noise and can lead to premature strut failure.
- GABRIEL Strut Mounts are produced to O.E. standards and perfectly replace the original units.
Gabriel® is one of the oldest and largest suppliers of Heavy-Duty shocks, offering exceptional products and wide variety of applications.
Fleetline Adjustable E
(63000 SERIES)
- The original Gabriel Adjustable shock absorber, strengthened for H.D. truck application
- Adjustable for Regular, Firm, Extra Firm settings
- Wide Japanese truck application
FleetlineTM
(83000/85000/85300/85700 SERIES)
- Built tough to match or exceed OE standards
- 10-stage valving, multi-lip piston seal and many other H.D. features
- High temperature oil and seal for extreme heat conditions
GasSLXTM
(89000 SERIES)
- Unique gas cell prevents aeration and reduces fade
- Adjustable for Regular, Firm, Extra Firm settings
- High temperature oil and seal to resist extreme heat conditions
- Ideal for longer-life commercial vehicle applications
